9/16" (14mm) Inner Diameter Stainless Steel Braided Fuel Hose | AN-12 Fitting

DESIGN

• Can be used with AN-12 Fittings
• Rubber fuel hose with stainless steel braided outer.
• Protective braid can reduce possibility of damage through chafing.
• Standard 14mm internal diameter, 20mm outer diameter.
• Outer stainless steel braiding.

USE

• Used for low pressure applications such as vehicles with carburettors.
• Used with Unleaded Petrol.
• Use with Magna clips or jubilee clips.
• Sold per metre.

SPECIFICATION

• Inner Diameter: 14mm (+/- 0.4mm)
• Outer Diameter: 20mm (+/- 0.7mm) Wall thickness: 3mm
• Working Pressure: 145 PSI (10 BAR MAXIMUM)
• Bursting Pressure: 725 PSI (50 BAR)
• Operating Temperature: -35° to + 95°

Please consult a mechanic/expert for suitability and installation as fuel can be very dangerous, fuel products should be fitted with caution. Care should be give to all connection points of the hose and minimum bend radius must be considered. Hose should be regularly inspected after installation and continuously throughout its useable lifespan. Consideration and care should be given to where the hose is used/routed, it should be kept away from ignition/heat sources and run a route away from the driver/occupants.